GFCI outlet installation in Wall Township

Name: Integrity Electrical Contracting
Address: 3707 Belmar Blvd, Wall Township, NJ 07753, United States, New Jersey, New Jersey, 07753, US
Telephone: 732-552-9045
Price range: $$-$$$$
Rating: 5.0

Integrity Electrical Contracting Inc installs and upgrades outlets and switches for homes and businesses in Wall Township, including GFCI outlets for kitchens and baths, standard and USB outlets, three way switch setups, and dimmer installations with code compliant workmanship, permits handled, and clear upfront pricing.

Get a quote today!

Integrity Electrical Contracting Inc can take care of all of your GFI Outlet needs from repairs to installations. We are here to support any type of electrical service work, which includes GFI outlets or standard outlets, whether inside or outside, repairs, installations or replacements.

You may ask what is a GFCI Receptacle? Or what does GFCI stand for? And why do we need them?
Well, good questions…

A receptacle is just a fancy word for an outlet and GFCI stands for Ground Fault Circuit Interrupter, we know them as GFI’s.

As for why do we need them?

They are designed to protect you from an electrical shock and are required to be by any sink, outdoor, or anywhere there could be water nearby. They sense interruption in the current and trip the circuit to cut off the electricity flow to the outlet in an instant.

If the GFI trips, you can…

Try to reset that receptacle by pressing the reset button.
If there is no reset button, check the panel and even if none of the breakers are off, you should still reset it.
What you might not know is that GFI’s can be connected with other outlets around your house and if it is tripped, it cuts off electricity to those other outlets. You need to find that GFI and reset it, then they should all come back on.
Another tip though is to check what you are plugging in. Often when appliances or other things plugged into GFI’s get old, they may still work, but they operate in a way that continues to cause the GFI to trip, so you may need that appliance serviced or a new one entirely.

If you find that GFI keeps tripping, stop and call a licensed electrician to help you out. Contact Integrity Electrical by filling out this Service Request or calling 732-552-9045.

Get a quote today!

Outlet and switch upgrade options

Maximize safety, convenience, and code compliance with professional outlet and switch upgrades in Wall Township. Integrity Electrical Contracting Inc installs and replaces GFCI outlets for kitchens and baths, standard and USB receptacles, three way switch controls, and dimmers matched to your LED fixtures. Every installation is performed by licensed electricians with clear upfront pricing, permits handled when required, and clean, reliable workmanship.

Get a quote today!

GFCI outlets

Protection for kitchens, bathrooms, laundry, garages, basements, and outdoor locations in Wall Township with testing and labeling.

• Code compliant line and load terminations
• Weather resistant and in use covers outdoors
• Troubleshooting nuisance trips

Standard and USB outlets

Installation and upgrades of tamper resistant receptacles including USB and USB C combos for convenient charging.

• Box fill and wire gauge verified
• Grounding tested and labeled
• Strategic placement at workstations

Three way and four way switches

Add or reconfigure multi location switching for halls, stairs, and large rooms with proper traveler wiring.

• Compatible with existing fixtures
• Neutral availability checked
• Clean wall repairs when required

Dimmer installations

Comfortable, flicker free dimming matched to LED, CFL, or incandescent fixtures for homes and businesses.

• Leading or trailing edge dimmers as required
• Fixture compatibility verified
• Noise and flicker mitigation

Outlet and switch replacements

Safe replacement of worn or damaged devices with clear labeling and panel schedule updates.

• Tamper resistant and child safe options
• Decor and color matched plates
• Surge protection recommendations

Code upgrades and permits

Integrity Electrical Contracting Inc manages permits and inspections and brings existing circuits to current standards.

• GFCI and AFCI protection where required
• Grounding and bonding corrections
• Written workmanship warranty

Service & Repairs

Generator Installation & Repair

Generator Maintenance Program

EV Charger Installation

Starlink Installation

Underground Gas Line Installation

Pool & Spa Wiring

Lighting Design

Smart Home Installation

New Construction / Renovation

Electrical Inspection

GFI Outlet Installation

Infratech Heater Installation

TV Installation

Chandelier Installation & Repair

Gas Lantern Installation

Bathroom Fan Installation & Repair

Attic Fan Installation & Repair

Smoke Detector Installation & Repair

Outlet options in Wall Township

Use this quick reference to choose the right device by room and code need. Integrity Electrical Contracting Inc installs and tests every outlet or switch to ensure safe, code compliant operation with clear upfront pricing.

Location	Recommended device	Code requirement	Typical amperage	GFCI needed	Typical install time
Kitchen counters	GFCI outlet, tamper-resistant; USB optional	Small-appliance branch circuits	15–20A, 120V	Yes	30–60 minutes each
Bathroom	GFCI outlet, tamper-resistant	Dedicated 20A circuit typical	20A, 120V	Yes	30–60 minutes
Laundry area	GFCI outlet; 240V dryer receptacle as needed	Laundry branch circuit, GFCI protection	15–20A 120V or 30A 240V	Yes for 120V receptacles	45–90 minutes
Garage	Weather-resistant GFCI outlet; EV charger circuit optional	GFCI required in garages	15–20A 120V; EV 40–60A 240V	Yes	45–120 minutes
Outdoor	Weather-resistant GFCI with in-use cover	Outdoor WR + in-use cover required	15–20A, 120V	Yes	45–90 minutes
Hallways and stairs	Three-way or four-way switches; optional dimmer-rated	Lighting control from multiple locations	15A, 120V control circuit	No (outlets may vary)	60–120 minutes
Living room and bedrooms	Tamper-resistant outlets; compatible LED dimmers for fixtures	AFCI protection typical on new circuits	15–20A, 120V	No (unless near sinks)	30–90 minutes
Home office or commercial suite	USB or USB-C outlets at workstations; dimmer-compatible controls; extra circuits for IT	Device and load calculations per layout	20A dedicated circuits common	Varies by location	90–180 minutes

Notes: Times are typical once on site and may vary with access, condition, and permitting. For moisture, burning odors, or sparking, stop use and contact a licensed electrician.

Integrity Electrical Reviews

Do I need GFCI outlets in kitchens, bathrooms, garages, or outdoors?

Yes. Code requires GFCI protection in wet or damp locations such as kitchens, bathrooms, garages, basements, laundry areas, and outdoor receptacles. Integrity Electrical Contracting Inc installs and labels GFCI outlets or GFCI breakers to meet current Wall Township and New Jersey code.

What is the difference between a GFCI outlet and a standard outlet?

A GFCI monitors current and quickly shuts off power if it detects a ground fault, helping prevent shock. Standard receptacles do not provide this protection. We install GFCIs with proper line and load terminations and test with a GFCI tester before completion.

Can you add USB or USB-C outlets during installation?

Yes. We install tamper-resistant USB or USB-C combo receptacles, ensuring box fill, wire gauge, and breaker size are correct. We can also replace existing outlets with USB models at common charging locations.

Do you install three way switches for hallways and staircases?

Yes. We add or reconfigure three way and four way switch controls so lights can be operated from multiple points. We verify traveler wiring, neutral availability, and compatible dimmers when needed.

Are dimmer switches compatible with LED lighting?

Only with dimmer and lamp compatibility. We select ELV or leading/trailing-edge dimmers matched to your LED fixtures to avoid flicker or hum. We can supply a compatible dimmer list for your fixtures.

How long does a typical GFCI outlet installation take?

Most single GFCI replacements take 30 to 60 minutes once on site. Adding new locations or correcting wiring issues can take longer. We provide clear upfront pricing before work begins.

Can you replace old two prong outlets with grounded three prong outlets?

Yes. Where grounding is present we install grounded receptacles. Where no ground exists, options include running a new grounding conductor, installing GFCI protected receptacles labeled “No Equipment Ground,” or targeted rewiring.

Do you handle permits and inspections for new outlets or circuits?

Yes. Integrity Electrical Contracting Inc pulls permits when required, adds dedicated circuits if needed, and coordinates inspections for code compliance in Wall Township.

Are your electricians licensed and insured?

All outlet and switch installations are performed by licensed and insured electricians from Integrity Electrical Contracting Inc following New Jersey and local code.

What should I do if a GFCI keeps tripping?

Stop using the device on that circuit and have it diagnosed. Common causes include moisture, faulty appliances, reverse polarity, or shared neutrals. We test with a GFCI analyzer, inspect terminations, isolate loads, and correct wiring issues.

Can you install weather resistant and in use covers outdoors?

Yes. We install weather-resistant receptacles with in-use bubble covers and GFCI protection outdoors. We also use proper box types and gasket seals to prevent moisture intrusion.

Do you provide a warranty on outlet, USB, three way, and dimmer installations?

Yes. We include a written workmanship warranty and pass through manufacturer warranties on devices and materials we supply.